威格士齒輪泵,VICKERS齒輪泵***
如果您對該產品感興趣的話,可以
產品名稱: 威格士齒輪泵,VICKERS齒輪泵***
產品型號:
產品展商: 美國VICKERS威格士
產品文檔: 無相關文檔
簡單介紹
威格士齒輪泵,VICKERS齒輪泵***
1 5/8-12 Suction; 1 1/16-12 Pressure SAE Straight Thread
O-ring Ports - Side
02 = 1 5/8-12 Suction; 1 1/16-12 Pressure SAE Straight Thread
O-ring Ports - Rear
威格士齒輪泵,VICKERS齒輪泵***
的詳細介紹
威格士齒輪泵,VICKERS齒輪泵***
L2 gear pumps can be ordered by using
the following Model Code.
A twenty-three digit coding system has
been designed to identify all of the
/8 Inch Dia. 13 Tooth Spline 16/32 Pitch Shaft Extension 41.1 [1.62]
AB = 7/8 Inch Dia. Straight Keyed, Keyway 6.4 X 25.4 [.25 X 1.00]
Shaft Extension 41.1 [1.62]
AD = 7/8 Inch Dia. 41 Tooth Spline 48/96 Pitch Shaft Extension 24.9 [.98
features available on L2 single gear
pumps. The characters and their relative
positions within the code identify specific
features.
Use the Model Code Matrix as an aid
when assembling the model code for the
pump with the features you desire. It
03 = 1 1/4 Suction; 3/4 Pressure Split Flange Ports - Side
04 = 1 5/8-12 Suction; 7/8-14 Priority Pressure; 1 1/16-12 Secondary
Pressure SAE Straight Thread O-ring Ports - Side
05 = 1 5/8-12 Suction; 7/8-14 Priority Pressure; 1 1/16-12 Secondary
Pressure SAE Straight Thread O-ring Ports - Rea
may be helpful to photocopy the matrix
and write the numbers and letters into to
the boxes as you select features.
All twenty-three digits of the code must
be submitted when ordering. The seven
zeros at the end of the model code are
for factory use, be sure to include them
when ordering.
