parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
如果您對該產品感興趣的話,可以
產品名稱: parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
產品型號:
產品展商: PARKER/DENISON
產品文檔: 無相關文檔
簡單介紹
parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
壓力 (BAR) 180 Intermittent (90 Continuous)
dual path hydrostatic propulsion system is to run
lines to the hydraulic drive motors.
parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
的詳細介紹
parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
Typical input speed is 3600 RPM. Intermittent pressure is 2600 psi.
The HP2 Series tandem pump system features:
? Two 11.5 cc or 16.0 cc pumps
? 2.5 quart integral reservoir
? Shock and/or check valves
? Integral system cooling fan
? Charge pump
? SAE “B” mounting flange, direct drive possible to eliminate belts and pulleys
HP2系列由單個驅動軸上的兩個獨立控制的超中心活塞泵組成。
它們被容納在一個緊湊的儲存器中，并帶有過濾器和相關的閥門。
典型輸入速度為3600 RPM。 間歇壓力2600 psi
The HP2 Series is composed of two independently
端口連接類型 STRAIGHT THREADED
controlled over-center piston pumps on a single input drive shaft.
They are housed in a compact reservoir with a
filter and associated valving. All that is required to complete a
泵排量 (CC/REV) 11.5 | 16.0
鋁結構提供的重量比
?雙向
?*壓機械密封，用于1000 PSI（69.0巴）背壓的系列應用
?滾子軸承壽命長
?Buna-N密封是石油和乙二醇型流體的標準
?*達17 HP輸出
?體積效率達到85％
?外部外殼可用（**單次旋轉）
泵排量 (CU IN/REV) 0.70 | 0.98
parker串聯安裝柱塞泵**,**派克串聯安裝柱塞泵
